So I want to share with you A DIY project for the X3. Sorry for writing in English but I don't know German.....
Today I completed a very simple and very useful project for my X3 .It is possible to be done for other BMW models with the appropriate switch.
I was looking for a place to put the garage remote control in my car, but I was not satisfied with nothing. I looked and solutions such as Homelink but it was too expensive.
So I do it my way ...
My X3 has the panorama roof and the ceiling console has space for other switches. So I ordered from Ebay a switch identical to switch that the car already has , for 12 euros.
http://cgi.ebay.com/ebaymotors/ws/eB...m=170595719360
Then I opened the garage door remote control and found the microswitch. I measured with a multimeter and found the points that make short circuit when we press the button, and then I connected the cables from the car's switch (he has a total of five cables because it goes back and forth and pressed up, I used only those used in the direction "forward")
With a special tool (I use a kitchen plastic knife of my wife .. ha ha ..) I took out the ceiling console. Comes out very easily, simply pull down and unbutton!
I removed the plastic cap covering the position of the switch, I installed the new one , and secured the remote with double sided tape inside the roof console, and ready !!!!!!!!
Now the garage door opens from the OEM switch on the roof console and everything looks OEM!
Here and images from the installation
</span>
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Kommentar